How To Install Metal Roofing On A Steep Roof

And for any exposed fasteners try to avoid over tightening them.

How to install metal roofing on a steep roof.

If the plumbing vent is close to the peak of the roof lap the shingles over the peak of the roof. Some roofs are so high and so steep that even working from scaffolding can be dangerous. A roofing harness provides the extra security you need when working on such a roof. Moreover try to ensure that the screws are all aligned evenly.

Install the roofing screws vertically along each rib in the panel. A careful inspection will identify potential hazards and will give. Adhere the shingles adjacent to the flange with roofing tar. Always begin working at the point with the longest peak to eave distance.

Use your 1 1 4. Take your first sheet of. Align the first metal roofing panel so that it overlaps the edging by 1 2 to 3 4 of an inch and is square to the roof line. It isn t hard as long as you are careful take your time do it right and be safe.

Try to space the screws about 12 inches apart down the entire piece of metal. To watch the entire series from the beginning click here. Be sure the larger edge is laid so that the small edge of the next panel will overlap it. The edging or eave flashing consists of metal strips that are used to cover the perimeter of the roof.

Adhere the joint where the cut edges of the shingles meet the dome with roofing tar. Add the metal panels.